TOPOTEK Gimbal cameraKIP640G25 is a single thermal imaging IP output gimbal camera, which adopts a 25mm focal length, 640×512 pixels resolution infrared thermal camera with 3-axis stabilization. It supports multi pseudo-color switching, area and point temperature measurement, Ethernet (standard RTSP stream) video output, local TF card storage. Our ground control software allows you to control the PTZ and the thermal imaging camera at the same time. You would also be able to control the gimbal camera and read parameters through UART or UDP. We also provide multiple serial control protocols.
| Voltage： |
DC12V-26.2V |
Power Consumption： |
Dynamic 6W |
| Roll angle action range： |
-45 °～ +45°, Jitter ±0.02° |
Pitch angle action range： |
-45 °～ +120° |
| Yaw angle action range： |
-280 °～ +280°, Jitter±0.03° |
Gimbal Mode： |
Support one key back to center, Lock/Follow Mode; Angle setting, position reading |
| Resolution： |
640×512 pixel |
| Pix Spacing： |
12μm |
| Type： |
Uncooled vanadium oxide infrared thermal imager |
| Wavelength coverage： |
8～14μm |
| Thermal sensitivity NETD： |
≤50mk@F1.0 |
| Temperature Measurement Range： |
-20℃~ 150℃ , can be extended to 100℃～550℃ |
| Lens specification： |
25mm lens, D:22.26 ° H：17.46 °V:14.01 ° |
| Contrast, Pseudo color： |
Adjustable, multiple pseudo-color mode |
| Main application： |
UAV aerial photography |
Work Condition： |
-20℃ to +60℃ / 20% to 80% RH |
| Storage Condition： |
-40℃ to +70℃ / 20% to 95% RH |
Weight (Not including dampers) |
380±10g |
